 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor S78LxxL Positive-Voltage Regulators Descriptions This series of fixed-voltage monolithic integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of Noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high-current voltage regulators. Each of these regulators can deliver up to 100mA of output current. The internal limiting and thermal shutdown features of these regulators make them essentially immune to overload. When used as a replacement for a Zener diode-resistor combination, on effective improvement in output impedance can be obtained together with lover-bias current. Features * 3-Terminal Regulators * Output Current of 100mA * Thermal Shutdown Protection * Short-Circuit Limit Protection Ordering Information Type NO. S78LxxL Marking S78LL Package Code TO-92L :Voltage Code (05:5V, 06:6V, 08:8V, 09:9V, 10:10V,12:12V,15:15V,18:18V,24:24V) Outline Dimensions ( Unit : mm ) BLOCK DIAGRAM V I Current Source Protection Circuit Startup Circuit Reference Voltage + Error Amp R1 VO R2 GND PIN Connections 1. Output 2. GND 3. Input KSD-I0D001-001 1 S78LxxL Absolute maximum ratings Characteristics Symbol S78L05L Thru S78L10L S78L12L Thru S78L18L S78L24L 1 150 -40 ~ +85 -55 ~ +150 Rating 30 35 40 W V [Ta=25C] Unit Input Voltage VI Power Dissipation Junction Temperature Operating temperature range Storage temperature range PD TJ Topr Tstg Device Selection Guide Device S78L05L S78L06L S78L08L S78L09L S78L10L S78L12L S78L15L S78L18L S78L24L Output Voltage 5.0V 6.0V 8.0V 9.0V 10V 12V 15V 18V 24V KSD-I0D001-001 2 S78LxxL Electrical Characteristics (Electrical Characteristics at VI=10V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C S78L05L Min. 4.80 4.75 4.75 TJ=25C TJ=25C TJ=25C TJ=25C 41 Typ. 5.00 32 26 15 8 3.8 1.7 49 Max. 5.20 5.25 5.25 150 100 60 30 6 1.5 0.1 - Unit Output Voltage** VO IO=1mA ~ 40mA VI=7V ~ 20V IO=1mA ~ 70mA VI=10V VI=7V ~ 20V VI=8V ~ 20V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=8V ~ 20V IO=1mA ~ 40mA VI=8V ~ 18V, f=120Hz V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V Electrical Characteristics (Electrical Characteristics at VI=11V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C S78L06L Min. 5.75 5.70 5.70 TJ=25C TJ=25C TJ=25C TJ=25C 40 Typ. 6.00 35 29 16 9 3.9 1.7 48 Max. 6.25 6.30 6.30 175 125 80 40 6 1.5 0.1 - Unit Output Voltage** VO IO=1mA ~ 40mA VI=8V ~ 20V IO=1mA ~ 70mA VI=11V VI=8V ~ 20V VI=9V ~ 20V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=9V ~ 20V IO=1mA ~ 40mA VI=9V ~ 19V, f=120Hz V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V KSD-I0D001-001 3 S78LxxL Electrical Characteristics (Electrical Characteristics at VI=14V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=10.5V ~ 23V IO=1mA ~ 70mA VI=14V VI=10.5V ~ 23V VI=11V ~ 23V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=11V ~ 23V IO=1mA ~ 40mA TJ=25C VI=13V ~ 23V, f=120Hz TJ=25C TJ=25C TJ=25C S78L08L Min. Typ. Max. 7.7 7.6 7.6 37 8.0 42 36 18 10 4 1.7 46 8.3 8.4 8.4 175 125 80 40 6 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V Electrical Characteristics (Electrical Characteristics at VI=16V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=12V ~ 24V IO=1mA ~ 70mA VI=16V VI=12V ~ 24V VI=13V ~ 24V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=13V ~ 24V IO=1mA ~ 40mA TJ=25C VI=15V ~ 25V, f=120Hz TJ=25C TJ=25C TJ=25C S78L09L Min. Typ. Max. 8.60 8.55 8.55 38 9.00 45 40 19 11 4.1 1.7 45 9.40 9.45 9.45 175 125 90 40 6 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V KSD-I0D001-001 4 S78LxxL Electrical Characteristics (Electrical Characteristics at VI=17V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=13V ~ 25V IO=1mA ~ 70mA VI=17V VI=13V ~ 25V VI=14V ~ 25V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=14V ~ 25V IO=1mA ~ 40mA TJ=25C VI=15V ~ 25V, f=120Hz TJ=25C TJ=25C TJ=25C S78L10L Min. Typ. Max. 9.6 9.5 9.5 37 10.0 51 42 20 11 4.2 1.7 44 10.4 10.5 10.5 175 125 90 40 6 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V Electrical Characteristics (Electrical Characteristics at VI=19V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=14V ~ 27V IO=1mA ~ 70mA VI=19V VI=14.5V ~ 27V VI=16V ~ 27V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=16V ~ 27V IO=1mA ~ 40mA TJ=25C VI=15V ~ 25V, f=120Hz TJ=25C TJ=25C TJ=25C S78L12L Min. Typ. Max. 11.5 11.4 11.4 37 12.0 55 49 22 13 4.3 1.7 42 12.5 12.5 12.6 250 200 100 50 6.5 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V KSD-I0D001-001 5 S78LxxL Electrical Characteristics (Electrical Characteristics at VI=23V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=17.5V ~ 30V IO=1mA ~ 70mA VI=23V VI=17.5V ~ 30V VI=19V ~ 30V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=19V ~ 30V IO=1mA ~ 40mA TJ=25C VI=18.5V ~ 28.5V, f=120Hz TJ=25C TJ=25C TJ=25C S78L15L Min. Typ. Max. 14.40 14.25 14.25 34 15.0 65 58 25 15 4.6 1.7 39 15.60 15.75 15.75 300 250 150 75 6.5 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V Electrical Characteristics (Electrical Characteristics at VI=26V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=20.5V ~ 33V IO=1mA ~ 70mA VI=26V VI=20.5V ~ 33V VI=22V ~ 33V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=22V ~ 33V IO=1mA ~ 40mA TJ=25C VI=21.5V ~ 31.5V, f=120Hz TJ=25C TJ=25C TJ=25C S78L18L Min. Typ. Max. 17.3 17.1 17.1 32 18.0 70 64 27 19 4.7 1.7 36 18.7 18.9 18.9 360 300 180 90 6.5 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V KSD-I0D001-001 6 S78LxxL Electrical Characteristics (Electrical Characteristics at VI=32V, IO=40mA, CI=0.33 , CO=0.1 , 0TJ125, Unless otherwise specified) Parameter Symbol Test Condition* TJ=25C IO=1mA ~ 40mA VI=26.5V ~ 39V IO=1mA ~ 70mA VI=32V VI=26.5V ~ 39V VI=29V ~ 39V IO=1mA ~ 100mA IO=1mA ~ 40mA VI=28V ~ 39V IO=1mA ~ 40mA TJ=25C VI=27.5V ~ 37.5V, f=120Hz TJ=25C TJ=25C TJ=25C S78L24L Min. Typ. Max. 23.0 22.8 22.8 30 24.0 95 78 41 28 4.8 1.7 33 25.0 25.2 25.2 480 400 240 120 6.5 1.5 0.1 - Unit Output Voltage** VO V Line Regulation VO(VI) mV Load Regulation Quiescent Current Quiescent Current Change Dropout Voltage Ripple Rejection VO(IL) IQC IQC VDROP RR mV mA mA V * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33 capacitor across the input and a 0.1 capacitor across the output. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0D001-001 7 S78LxxL Electrical Characteristics Curve Fig.1 VO vs. TJ 5.5 Fig.2 IQC vs. TJ Quiescent Current IQC [mA] 5 4 Output Voltage VO [V] 5.3 S78L05L VI=7V, IO=40mA 5.1 3 4.9 2 4.7 1 4.5 -30 0 30 60 90 120 150 0 S78L05L VI=10V, IO=40mA -30 0 30 60 90 120 150 Junction Temperature TJ [C] Fig.3 VO vs. IO 7.5 Junction Temperature TJ [C] Fig.4 VO vs. VI 8.0 Output Voltage VO [V] 6.0 Output Voltage VO [V] S78L05L VI=10V,Ta=25C S78L05L, Ta=25C 6.0 4.5 4.0 IO=10mA IO=40mA 3.0 2.0 IO=100mA 0.0 0.0 2.0 4.0 6.0 8.0 10 1.5 0 0 50 100 150 200 250 300 Output Current IO [mA] Fig.5 IQC vs. VI Quiescent Current IQC [mA] 5.0 4.0 3.0 2.0 1.0 0.0 1250 Input Voltage VI [V] Fig.6 PD vs Ta Power dissipation PD [mW] 1000 750 500 S78L05L IO=40mA, Ta=25 0 10 20 30 40 250 0 0 25 50 75 100 125 150 Input Voltage VI [V] Ambient Temperature Ta [C] KSD-I0D001-001 8 S78LxxL KSD-I0D001-001 9 |
Price & Availability of S78L06L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |